The camcorder battery is used properly and maintained well, so you can have a maximum of enjoyment. In fact, if this is a good care of the battery, which ensures long life.
It is interesting to note that the battery life is shorter in a cold environment. So, if you register in a cold environment, the efficiency of the battery is removed and will be used quickly recognized.
Try as much as possible in order to preserve battery performance. To ensureYou do not leave the camcorder in standby mode when not recording to save battery. That the transition between scenes can be made even if the recording will be stopped and restarted. While you are positioning the subject, the selection of an angle or view on the LCD screen or through the viewfinder, the lens moves automatically and the battery is used. The battery is also used when a tape is inserted or removed. Try to have sufficient power to camcorder battery 2 to 3 times moreHost, as she had expected.
Never leave, parked the battery to temperatures above 140 º F (60 º C), eg in a car under the sun or under direct sunlight. During charging or recording, the battery heats up causing the energy that was generated and a chemical change that has fallen into, this is normal and no cause for concern.
Remove keep the battery from the device after use and place in a cool place. If the batteryon camera, a small amount of current flows into the camera when the POWER switch to OFF as a result set you can shorten the battery installed. The battery is dead forever, even when not in use after charging, so you should use it for free right in front of the device.
When the battery indicator flashes rapidly just after turning on the camera, the battery should be replaced with a new fully charged. One brand, the new battery is not charged. Beforewhich are calculated from scratch, you must not download before recharging. If the battery is full, but not against it for a long period, which is released, so before using it to recharge.
If the terminals are not clean, the battery will shorten its life. Assembly and disassembly of repeated a few times, improves the condition of contact. From time to time clean the positive and negative terminals with a soft cloth or paper. Keep away from fireand keep it dry. Not try to break it open. Do not expose the battery to any mechanical shock.
0 ความคิดเห็น:
แสดงความคิดเห็น